How to Fix the DJI Phantom 3 Pro Camera?

When it comes to the DJ Phantom 3, it is without question one of the best drones out there in the market. However, it comes with its own set of problems. The camera, in particular, is very fragile. As such, you will probably want to know about how to fix the DJI phantom 3 pro camera. So without further ado, here are some of the ways in which you can get the camera of your drone fixed in no time.

How to fix the DJI phantom 3 pro camera? – Guide

  • Step One

The first thing that you need to do is to get the plate removed. This way, you will be able to take a good look at the board and inspect it for compressions or damages anywhere on it. If there are any spots, where the arm has forced its way onto the board, check that as well. After that, you will also want to test the motor itself.

  • Step Two

After that, you will have to test the state of the board by getting a new Gimbal and replacing the old one. What you want is something which has good movement and responds well to rolling and pitching along with providing a decent display for your mobile device. The board will translate the date from the sensor and provide a proper response to the Gimbal which has been articulated.

After that, you need to test the yawing arm and be certain that it is completely free of dirt, sand or any kind of debris. Also, make sure to perform a visual inspection of the whole thing during its rotation. Keep an eye out for noisy bearings since they need to be operating in a free manner without too much resistance. Another thing you want to keep an eye out for is a bent axel.

  • Step Three

After doing all the above things, you should now be able to see the Gimbal which has been damaged. So the only thing left to be done is to remove the Gimbal and start replacing it with the new one. In most cases, the sensor turns all the way back up to the motor itself. It is a common failure which requires the use of a new arm altogether.

  • Step Four

You can use a screw as a temporary solution for replacing the broken stop. However, it is most likely to fall off at some point in time or the other. As such, you will probably want to use the proper tools for this job without going for a temporary plaster. You can always get a professional to help as well. And with that, your camera should be good as new.

To Conclude

So the next time you want to know how to fix the DJI phantom 3 pro camera, keep the above things in mind. You will undoubtedly get a lot of help by following the steps mentioned here. Alternatively, you can always ask for help online as well.